Sunday, 15 November 2026

The Battle of Soltau



27 September 1813 – Hannover Campaign – Day 4


French retreat to Hannover to regroup army group
Prussians attack Soltau

The Prussians occupy Lehtre and attack Soltau
1st Prussian army – attack Soltau
2nd Prussian army – occupy Lechtre
3rd Prussian army – regroup at Peine

The French retreat to Hannover and defend Soltau
1st French army – retreat to Hannover
2nd French army – regroup at Laatzen
3rd French army – defend Soltau


Table at start of battle

Both armies are deployed on the table at the start of the battle
3rd French army are at the top, on or around the three objectives
1st Prussian army are at the bottom advancing in column of march

Marshal Murat had taken command of half of 8th corps on the right hand hill
General Kleist has taken command of half of 1st corps on the far right

There are three game objectives
Woods on the left
Hill in the centre
Farm on the right
The army who holds two at the end of 12 moves is the winner

Table at the end of the battle


The main Prussian attack was in the centre and on the left

3rd Prussian corps attacked the woods on the left.
The French fought hard to hold the woods, resulting in heavy casualties
The arrangement of the woods make it difficult to defend
The Prussians easily took the nearest section disrupting the whole defence
The French were driven from the other two sections
They counter attacked, but eventually had to retreat

2nd Prussian corps concentrated on the two hills either side of the road
Once taken they advanced either side of the hill
Their cavalry held the area between the hills and the woods
Their artillery advanced between the hill and the farm
This allowed them to support 1st corps attack on the farm.

General Kleist took command of half of 1st corps
He deployed the cavalry and artillery to pin the French on the extreme right
He did not take much part in the fighting, but did allow the infantry to attack the farm
Most of 7th French corps were deployed behind the farm, safe from Prussian artillery
The Prussians took the farm, but lost it to a late French counter attack

At nightfall the Prussians hold two of the three objectives
The French hold one of the three objectives
The Prussians win the battle

The French have lost 10 infantry, 2 cavalry and 2 artillery casualties (4400 men)
The Prussians have lost 10 infantry casualties (4000 men)

The French have 10 brigades in rou
The Prussians have 3 brigades in rout

Comments
From the casualties this appears to be a close run battle.
But the French have 10 brigades in rout, the Prussians only 3 brigades

On the left only one French brigade is left to cover the rout of 9th corps
Only one Prussian brigade is in rout

In the centre two French brigades are deployed in front of Soltau
Three brigades are trying to rally behind the town

All of 2nd Prussian corps, less one brigade, are formed ready to attack

On the right 7th French corps are firmly in control of the farm
Only one infantry brigade and the corps artillery are in rout
However 1st Prussian corps is redeployed ready to counter attack
2nd Prussian corps artillery are deployed to support them

Marshal Murat would be unwise to attempt to fight a second day of battle.

He could leave 7th corps in Soltau, forcing Kleist to lay siege to the town.
But he would find it difficult to regroup 8th and 9th corps to relieve the siege.

This must be considered a convincing Prussian victory

Sunday, 8 November 2026

Designing my fictional 1813 maps of Europe

 

Map of Europe

Previously I explained how I created my 1813 armies.   All were designed to fit on my 6x6 foot wargames table.   I would now have to design my campaign.  

The most important part of a campaign is the campaign map.   It was essential that I would be able to transfer the battles on the campaign map to the wargames table.    Thus my 6x6 foot table had to be the building block of my fictional campaign map of Germany and Spain.    It took many years to develop my current map, or rather series of maps.

I started with a road map atlas of Europe and tried to make each square a wargames table.   This proved impossible.   I experimented with having the atlas as a strategic map, and a series of home made tactical maps.  It was a lot of work, and it never felt right.   It was impossible to recreate mountain ranges, rivers and keep major cities and towns as strategic objectives.

From the start my 1813 world would be divided into five theatres of war.   In Germany there would be north (French v Prussian), centre (French v Russians) and south (Bavarian v Austrian).   In Spain there would be north (French v English) and south (French v Spanish).

The campaign would have to be divided into an endless series of mini campaigns.   Each would be about the size of the Waterloo campaign.   Each would provide about 6 battles to wargame, and last about two months real time.

Eventually I came up with a fictional map, or rather a series of maps.  

Above is my map of Europe.  The map is divided into countries and then military Regions.   Regional borders are shown in purple.   For example there are four regions in Spain and two in Portugal.   Each region is divided into nine military Districts.   Each district is a mini campaign area.   The white lines show the five campaign theatres as explained above.   You will see that there are three regions in each theatre, providing a possible 27 mini campaigns.  Each square on this map is a mini campaign.

North Germany Theatre Map

Each theatre has a map showing the three military regions in much more detail.   This is the one for North Germany.  The 27 districts are shown in purple dotted lines.   Each district is a mini campaign, each smaller square is a wargames table.   This map shows the main terrain features, which are based on actual rivers, cities and towns.   The road system is fictional, red lines show major roads connecting regional cities, the yellow roads connect towns within a region.   There is one city for each District, which becomes the mini campaign objective.    Main rivers are shown, but do not follow their actual course.

Hannover Campaign Map

This map is used for the campaign movement.   It covers half of two districts, both Hannover and Brunswick, in order to show the main supply depot of both armies.   It would also be used if the attacking Prussians failed in their attempt to take Hannover, and had to retreat towards Brunswick.

Each small square is a 2x2 foot square on the wargames table.   There are nine tables shown, each has nine squares within a black dotted line.   Each table has a city or town, which would be the game objective.

This map is very detailed and shows not only the city and towns, but also villages villages and farms.   It also shows hills and woods.   Each square is numbered, which corresponds with the number of the table 2x2 foot square.   As well as the main (red) roads and secondary (yellow) roads, it also shows unmarked tracks (brown).

Hannover Campaign Map

This shows the deployment of both French and Prussian corps on the morning of 26 September 1813.   The stars shows the centre of the battle for Lehtre, with 2nd Prussian army advancing to attack 1st French army.

Start of battle of Lehtre wargame

This shows the wargames table at the start of the wargame.   The nine map squares have been transferred to the wargames table using the nine scenic terrain squares with the same numbers.  Each square has a terrain feature which can be used in the battle report.   The three squares at the top is the French reserve area.  The town in the centre is Lehtre, which is the campaign battle objective.   The three squares in the centre are the wargame objectives.   The side which holds at least two of the three will win the battle/wargame.   The three squares nearest to the camera is the Prussian deployment area.

The corps are shown in the same position as on the map.   At the start of the wargame the attacking Prussian army has been deployed on the table at the bottom of the photo.   This is to speed up the initial moves when the attacking army would have to march onto the table.   There is a gap of 20” between the two armies, longer than long range artillery fire which is 12”.

The campaign and its mapping system sounds very complicated when I try to explain it.  But I hope you will see from the above that it is really very simple.  Setting up the table from the map only takes about half an hour, and is just a matter of following the map numbers and corps symbols.

Sunday, 1 November 2026

Designing buildings and woods

  

Commercial buildings

When I left the UK almost all of my wargame buildings were commercial, mostly from Hovels.   I collected a large collection of 15mm north European and Spanish buildings. This photo does not really do them justice, as they are two or three deep. I choose 15m because I planned to have 18mm and 28mm duplicate armies. I painted both, but now only use the 28mm figures. I found that the 15mm buildings looked “right” with the 28mm figures.

My home made town walls are also on this shelf, plus a large collection of German paper buildings which are more suitable for the 18mm figures.


North Europe buildings

There are kept on my main shelves, where I also keep my 18mm and 28mm armies. The 28mm are one corps to a base as shown. Once more the photo does not do them justice, but you can see them all on the 531 campaign battles/wargames recorded on my 1813 campaign diary blog. Slightly more than half are suitable for Germany, slightly less for Spain.

Most of these buildings are scratch built and there are:
Two villages, including church
Two walled farms/manor house
One inn
Hedges and stone walls to create farms
Four churches for cities and towns
10 scratch build houses to create a wide variety of towns, when used with Hovels
 


Spanish buildings

Again these are scratch built and consist of:
Two walled villas
Two villages including church
Farm buildings to use with hedges and stone walls
Four windmills, popular on Peninsular battlefields
10 town buildings to create towns when used with Hovels
Four windmills  

The four boxes on the top shelf have stone wall and hedge sections
About half are bought and the remainder scratch built.

Woods

I have about 40 commercial trees. All are 15mm, which look right with 28mm figures. All woods consist of a dark green felt cut to irregular shapes to create different size of woods. The trees are free standing, and can be removed when I want to move model soldiers through the woods.


Villages

All built up areas are free standing. Villages can be open or walled and have one church and two buildings. They are placed on a 6x6 inch piece of light brown felt. Buildings can be removed to allow movement or fighting inside the village.

 

Towns

Each town has two pieces of felt. They consist of one church and six buildings, mostly scratch built. There are a sufficient churches and buildings to allow for a wide variety of towns. Larger Hovels buildings are sometimes used to add variety.
 

Cities

Cities have four pieces of felt, and take up most of one square. A combination of Hovels and scratch built town houses are used to populate the city. Our largest Spanish or German church is used on one square, and one large Hovels building on each of the others. We have pretty basic city walls which can be used if necessary. This photo shows our campaign version of Ratisbon, which bears no resemblance to the actual city at all!

In our next post I will explain how it all comes together in the campaign.